Spartan High Tack Carpet Adhesive is water-based and specifically formulated to provide a tacky film of adhesive that is strong enough to eliminate any movement in the carpet after the installation is completed. It is suitable for both Double Bond and Direct Stick installations. The adhesive offers a quick grab and has sufficient working time for smaller and larger installations.
Application |
Apply adhesive with the recommended notched trowel.
Recommended V Notching V1 – 1.6mm x 1.6mm Notched Trowel for underlay to subfloor V2 – 2.4mm x 2.4mm Notched Trowel for Hessian backed carpets V3 – 3.2mm x 3.2mm Notched Trowel for Action Bac, woven or highly textured backings. A strong tack develops, enabling carpet/underlay to be lowered in almost immediately at temperatures in excess of 15°C. In colder conditions, allow adhesive to remain open until some initial tack develops, then lower in the carpet/underlay into the Wet film of adhesive. Check to ensure transfer of adhesive to the carpet/underlay has occurred. Roll the finished installation with a 25-35kg roller. Complete the installation according to manufacturer’s instructions. Do not allow heavy traffic for 24 hours. |
Clean Up |
Clean tools immediately after use with warm soapy water. Dried adhesive may be cleaned off using R550 Latex/Acrylic Adhesive Remover applied to a damp cloth then rubbed gently over the dried adhesive or alternatively Handy Wipes. |
Coverage |
V1 1.6mm x 1.6mm notched trowel: Up to 5m²/Litre (Approx)
v2 2.4mm x 2.4mm notched trowel: Up to 3m²/Litre (Approx) v3 3.2mm x 3.2mm notched trowel: Up to 2m²/Litre (Approx) |
Container Size |
15 litre plastic containers |
Shelf Life / Storage |
12 months when stored in original unopened packaging
To be stored in a dry area off the ground |
Notes & Precautions |
|
Safety & Handling |
Product is classified as NON-DANGEROUS GOODS, according to the WHS Regulations and the ADG Code |
Makinex Mixing Station MS 150
